> For the complete documentation index, see [llms.txt](https://fusersetup.dmakings.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://fusersetup.dmakings.com/troubleshooting/no-display-before-after-flashing-fuser.md).

# No display before / after flashing Fuser

1. Use K1 key to cycle between the display resolutions, give it a few seconds after each press.
2. If you are still not getting any display, disconnect the fuser and set your monitor display to 1920x1080
3. Re-attach the fuser and cycle through to the factory setting 1920x1080
4. You should now have video, we recommend you reflash your device after this step.